Smart phone flash tool error || SP Tool common error solution

In most of china device specially for android mobiles SP Tool is used.
It is an easy tool to flash the mobile phone, just you need to download the stock ROM, smart phone driver and a official data cable with pc or Laptop.

Steps to Flash:
1> Extract the downloaded file (firmware & tool)
2> Setup driver.
3> open tool by double clicking flash tool.
4> load the scat file.
5> click on download
6> connect mobile then flash start.
7> wait until green (ok) circle appears.

some common error with this tool:

Error 5054:

Error Message: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)

Cause: this error may appear if scat file is not valid or compatible for this phone.

Solution: Retry with correct file.

Error 5056:

Error Message: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5056)

Cause: this error may appear if the file size is larger than partition size or memory.

Solution: try to format the whole memory or use appropriate file.

Boot Image Loading Failed:

Error Message: Image UBOOT checksum failed!

Cause: this may appear if the check sum value of file do not matched!

solution: delete the "checksum" file from flash file then download.